Винтови помпи - Nova Rotors

nova

Company Tapflo - the official distributor of NOVA ROTORS. We are glad to present you a brief information about the product NOVA ROTORS on our site. Today, the company offers NOVA ROTORS screw pumps, which can be applied in variety sectors, including water treatment and food industries. Screw pumps are designed to pump various types of liquids: viscous, abrasive fluids, fluids with inclusions, suspensions, dispersions. Screw pump model range: D, MN, N, H, HS, V, X, R etc..

 

 

преглед

Винтови помпи - Nova Rotors

Where is recommended to use screw pumps?

A valvless design of the pump, direct dependence of its productivity on number of turns of the engine, and also an opportunity of change of a stream direction of a pumped liquid - all this, undoubtedly, advantages of screw pumps. Use of these features allows to recommend screw pumps for transmission of various liquids which list constantly increases. The main working part of the screw pump – pair of rotor-stator. The metal rotor of the spiral form is inside of stator (holders), made of elastomer. Under rotation of a rotor the volume of cavities inside of pair changes and the liquid moves on an axis of the pump, being superseded because of rotation of a rotor, change of volume in cavities creates soaking up effect..

Key benefits:

  • Constant non-pulsation flow on outlet.
  • Proportional pumping that allows to make the pump dosing Possibility to create a high pressure
  • Transferring of suspensions without structural failure and destruction of inclusions High suction capability, suction high is up to 7-8 m *
  • Transferring of high viscosity liquids
  • Pumping liquids with abrasive inclusions and a high content of dry substance without wear Easy maintenance
  • Simple design - easy pump maintenance, low operating costs

 

Diamond Series

D XS

Completely renewed mechanics to increase the per- formance with a new aggressive design. These pumps are completely reversible. Available a wide pumps range. Reversible flow up to 3 bar as standard: Up to 12 bar with hydraulic balance.

MN Series

MN XS

The dosing pump with small capacities, continuous flow, low pulsations, no vibrations, very high priming and flow reversibility; is suitable to pump precisely medium liquid, dense, viscous, with solid parts on suspension.

N Series

N XS

The pumps of this series can be made from cast iron, steel or stainless steel. Intended for long-term work, swapping of viscous and abrasive liquids, are un- pretentious in operation. The main use of pumps of N series - work in the industry of sewage treatment, work on the filter-press, transfer of cement and chisel solutions, pumping of storm drains.

 

H Series

H XS

The hopper with the feeding conveyor make pumps of this series suitable for tranfer products with high viscosity and elevated percentage of solids (up to 18%). The main usage of these pumps - sewage treatment, supply of drains on the conveyor, work on the filterpress, swapping of deposits, oil sludge and active silt. Possible versions from steel or stain- less steel.

 

HS Series

HS XS

This kind of pump can transfer sludges with high concentration of solids and the peculiar construc- tion of the hopper and the feeding conveyor is named “S” type and with this arragement it is able sometimes to substitute the bridgebreaker. In that series of pumps, it can be suggested specific technical solutions for dehydrated sludges coming from plate filter press with the 40% of dry solids. The main usages of these pumps are: work in the industry of sewage treatment, submission of drains on the conveyor, work on swapping after the filter- press.

X Series

X XS

The main usage of the pumps of series X -work in food industry. The pumps “X” series made exclusi- vely of S.S.316, have been projected and made in order to reach very high hygienic standards, removing possible dead zones, oil or grease lubricants which could damage the products. The pump construction helps the complete and easy cleaning of it; when required, it can have one or more CIP ports.

V Series

V XS

Vertical pumps in vertical execution. The vertical pumps have been projected in order to suck ea- sily the fluids from tanks, barrels, cisterns or wells and thanks to the reduced dimensions and partial immersion of the pump reduce the negative head. When requested, it is possible to supply different tank plates. Can be supplied by connectors for connections on hatches of tanks and tanks.

R Series with floating stator

Rghisa XS

Floating stator pumps have following advantages: less space and reducing maintenance costs. The stator is fixed on one single end, so as to enable the eccentric move of the rotor by means of a very simple articulation. Floating stator pump compact for use in food industry.

 

специални версии

Винтови помпи - Nova Rotors

Diamond Series
Маx capacity: 400 m3/h
Маx pressure: 48 bar
Max working temperature: 180°С
NPSHr: 3 m
Sizes available: from 30 to 300

MN Series
Маx capacity: 3000 л/ч
Маx pressure: 24 bar
Max temperature: 180 °C
NPSHr: 3 m
Sizes available: from 010-2 to 022-1
Material: cast iron, stainless steel

N Series
Маx capacity: 400 m3/h
Маx pressure: 48 bar
Max temperature: 180 °C
NPSHr: 3 m
Sizes available: from 020-2 to 520-1
Material: cast ironG25, stainless steel 316/304, steel 52,0

H Series
Маx capacity: 200 m3/h
Маx pressure: 48 bar
Max temperature: 180 °C
Sizes available: from 020-2 to 520-1
Material: stainless steel 316/304, steel 52,0

Серия: HS Series
Маx capacity: 100 m3/h
Маx pressure: 48 bar
Max temperature: 180 °C
Sizes available: from 020-2 to 520-1
Material: stainless steel 316/304, steel 52,0

X Series
Маx capacity: 60 m3/h
Маx pressure: 6 bar
Max temperature: 120 °C
NPSHr: 3 m
Sizes available: from 020-2 to 320-1
Material: stainless steel 316

DV Series
Маx capacity: 400 m3/h
Маx pressure: 48 bar
Max temperature: 180 °C
Sizes available: from 025 tо 300
Material: stainless steel 316/304, steel 52,0

R Series
Маx capacity: 6 m3/h
Маx pressure: 7 bar
Max temperature: 80 °C
NPSHr: 4 m
Sizes available: from R24 tо R88
Material: stainless steel 304/316 

 

 

характеристики

Винтови помпи - Nova Rotors

 Nova-rotors-curves 1

Performances of progressing cavity pumps, presented in this brochure. Curves are valid for airless water of 20 degrees C  and viscosity 1 mm2/s

About Tapflo. Tapflo Group is an independent, family owned, European manufacturer and global supplier of Air operated diaphragm pumps, centrifugal pumps and other industrial process equipment. Tapflo is represented by own sales offices in 28 countries and by independent distributors in more than 30 countries.